Electronic Component Selection Guide...Work in Progess

I have been working on this topic for a very long time.

In Electronics, one of the main topics is Component selection. 

How well circuits perform depends on how well components are selected. Component selection is a never-ending process. The component selection remains constant throughout the career.

I am thinking of automating this component selection. This is my first step towards automation. And this is always an ongoing process.

Below are the major components of electronics

  • Bipolar Junction Transistor--> Invention which changed the world, so I want to start with that.
  • MOSFET --> Metal Oxide Silicon Field Effect Transistor
  • Resistor
  • Capacitor
  • Inductor
  • Diode
  • IGBT--> Insulated Gate Bipolar Transistor
  • Op-Amp-->Operational amplifier
  • MOV- Metal Oxide Varistor
  • EMI filter
  • TVS diode-->Transient Voltage Suppressor
  • ADC chip
  • Programmable diode
  • Optocoupler
  • Mosfet driver
  • Zener diode
  • Microcontroller
Below is the link to the spreadsheet.


Comments

Post a Comment

Popular posts from this blog

Step by step DCM Flyback Design calculation - Part 1

Image
 I have been trying to design the flyback convertor for very long time. Each time I came across different different material and got confused like anything and drop. So this time, I have decided to take only one material and follow it completely start to end, and then proceed with further materials and designs. I came across Infineon technologies material for designing DCM flyback convertor. I started with understanding the  formulas and step by step procedure. Flyback convertor generally we go if power needed is around 100W Below is the basic specifications needed to start designing flyback convertor. Input voltage range Output Voltage Output current/ Load current Output Ripple voltage Efficiency I think it is better to make one flow diagram to represent all the steps than by writing all the steps. I thought of making formulas also as a flow diagram. But  I looks messy. So I will mention them as step by step as below. Step 1: Calculating maximum input Power The maximum i...
Read more

Designing DC-DC convertor : 24V - 5V Buck convertor, 3Amps

Image
Buck converter--> Basic DC-DC convertor topology which is used for stepping down the Voltage. So below is the simplistic view of the buck converter, don't wanna make the content boring by explaining how it works and all.  I wanna document the calculation behind the value of the inductor and capacitor. So let's go straight into the matter. The TI "LMR51430XDDCR" IC is selected for a 24V to 5V converter which is capable of a maximum of 3Amps. Input Specification: Input Voltage: 4.5-V to 36-V input voltage range. Required output voltage: 5V. Continuous Output Current: 3 Amps Frequency: 500-kHz Calculations: 1. Calculating Duty cycle, D:  `D=\frac{V_{out}}{V_{i n} }` `D= 5/24` `D = 0.2084` 2. Feedback resistor calculations: `R_{FBT}=\frac{V_{out}-V_{ref}}{V_{ref} } \times R_{FBB}` `R_{FBT}= ((5 - 0.6) / 0.6) \times  13.7 \times  10^ 3 ` `R_{FBT}=100.4kohm` 3. Inductor calculation: `L_{min}=\frac{V_{i n-max} - V_{out}}{I_{out}\times K_{i nd}} \times \frac{D}{...
Read more